HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 86
Installing a HotPlug SCSI Hard Drive, Hard Drive LEDs in Appendix E.
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Installing Hardware Options Installing a Hot-Plug SCSI Hard Drive To install a hot-plug SCSI hard drive: 1. Identify an available slot with the next lowest SCSI ID number. Refer to "SCSI IDs" in this chapter. 2. Press the port-colored release button (1). 3. Open the ejector lever (2). 4. Insert the hard drive into the available drive bay (3). Be sure that the drive seats firmly into the connector on the SCSI backplane. 5. Close the ejector lever to secure the drive in the drive cage (4). Figure 3-32: Installing a hot-plug SCSI hard drive NOTE: If you backed up data before replacing a drive, restore the server data from the backup. 6. Use the hot-plug SCSI hard drive LEDs to identify the status of the installed drive. For more information about hard drive LEDs, refer to "Hot-Plug SCSI Hard Drive LEDs" in Appendix E. 7. Resume normal server operations. HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 3-41