HP NetServer AA 4000 HP AA HP Netserver 4000 Reference Guide - Page 95
Running MTCFlash on each CE
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Ch 5: System Upgrades • Install Endurance Software • Kit Number • IOP installation • Restore Original Installation Parameters • IOP in TUPLEx (for IOP1, choose TUPLE1; for IOP2, choose TUPLE2) • Destination directory for IOP Maintenance Mode • DoNot Edit Configuration • Install the Endurance 4000 online documentation. • If you are running Windows NT Server on the IOP, configure the Network, Service, Server, and Properties to Maximize for Network Performance. • Determine whether the Marathon Datagram Service (MtcDgs) is installed on your server. If not, install and bind it using the procedures outlined in the networking setting. • Install the Virtual Network Provider on each IOP. • Reboot the IOP and CE operating systems. Upon reboot, the Virtual Network is enabled on the Endurance 4000 server. Use the MTCFlash diskette to Flash the MICs on the IOPs. WARNING Make sure to complete the flash of the MIC by completely powering off the NetServer using the power switch. Do not use the reset button or issue a Ctrl-Alt-Del reboot. • Boot the IOPs to Online Marathon mode. Examine the Marathon Manger while the systems boot to confirm the IOP status of the IOPs is online. Running MTCFlash on each CE • To complete the Marathon software upgrade, you must run MTCFLASH on both CEs. • You will have to temporarily attach a keyboard to the CEs to complete this task. Network Server Division 5-13