Lexmark M410 User's Guide - Page 210
Setting Up a FaxPort, modem to properly grounded electrical outlets.
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Setting Up a Fax Port Power Cord External Class 1 Fax Modem Printer Serial Port Modem Cable Phone Cord To use your printer serial port to process fax data: 1 Turn the printer power Off (O) and unplug the printer power cord. 2 Turn the modem power Off and unplug the modem power cord. 3 Disconnect all cables from the back of the printer. 4 Connect the hardware. The end of the modem cable that connects to the serial port must be 25-pin. The class 1 fax modem connects to the serial port of your printer. If you need additional help, refer to the class 1 fax modem documentation for details. Note: It is very important to power on the modem before you power on the printer. Note: See "Using the Operator Panel and Menus" on page 33 to identify the display and operator panel buttons if you need help. 5 Reconnect all cables to the back of the printer. 6 Reconnect the power cords to the printer and the modem to properly grounded electrical outlets. 7 Turn the modem power On. 8 Turn the printer power On (|). 9 Once Ready displays, complete the following steps to configure the serial port for fax data: a Press Menu> or until FAX MENU appears on the first line of the display. c Press Select. Fax Port appears on the second line of the display. d Press Select to choose Fax Port. 198 Chapter 10: Fax