Lexmark M410 User's Guide - Page 94

PCL Emul Menu (continued) Menu Item TRAY RENUMBER Values Assign MP Feeder Assign Tray 1 Assign Tray 2 Assign Man Paper Assign Man Env Each of the above menu items supports the following three values: Off* 0 ... 199 None VIEW FACTORY DEF Restore Defaults Yes No Note: Assign Tray 2 only displays if the optional 500-sheet drawer is installed. Assign MP Feeder only displays when Configure MP is set to Cassette. Auto CR after LF Only installed paper sources display on the operator panel as values. However, you may set TRAY RENUMBER to uninstalled sources. The TRAY RENUMBER menu item lets you configure your printer to work with printer drivers or applications that use different source assignments to request a given input source. Select Off to use the factory default paper source assignments. Select a numeric value (0 ... 199) to assign a custom value to a paper source. Select VIEW FACTORY DEF to view the factory default values assigned to each paper source. In the Restore Defaults menu item, select Yes to return all tray assignments to factory default values. See "Paper Sources and Sizes" on page 116 for information on available paper sources for your printer. Refer to the Technical Reference for more information about assigning source numbers. Off* On Auto LF after CR The Auto CR after LF setting determines if the printer automatically performs a carriage return after a line feed control command. Off* On *Factory default The Auto LF after CR setting determines if the printer automatically performs a line feed after a carriage return control command. 82 Chapter 3: Using the Operator Panel and Menus