Lexmark M410 User's Guide - Page 225
Attaching a Hard Disk to the Adapter Card, Align the connector pins on the end of the hard
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Adapter Card Hard Disk You can purchase: • A hard disk with an adapter card already installed. • A hard disk that supports Optra FormsTM with an adapter card already installed. Refer to Optra Forms for more information. • A hard disk adapter card for installing a separately purchased hard disk. Complete the following instructions to attach the hard disk to the adapter card. If your disk is already attached to a card, go to "Accessing the Printer System Board" on page 201. Attaching a Hard Disk to the Adapter Card You can use the adapter card with any hard disk meeting the following criteria: • 2.5-inch platter • ATA-2 (IDE) interface • Maximum thickness of 15 mm (.59 in.) To attach the hard disk to the adapter card: 1 Align the connector pins on the end of the hard disk with the connector on the back of the adapter card. Understanding Option Cards 213