Netgear RAXE290 User Manual - Page 12
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290, Table 1. LED descriptions, User Manual
View all Netgear RAXE290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290 Table 1. LED descriptions LED and Button Power LED Internet LED 2.4 GHz WiFi LED Description Solid white: The router is ready. Solid Amber: The router is booting. Blinking amber: Firmware is upgrading, or the router is being reset to factory defaults. Off: Power is not supplied to the router. Solid white: The Internet connection is ready. Blinking white: The port is sending or receiving traffic. Solid Amber: An Ethernet cable is connected to the Internet port but the Internet connection is not ready. Blinking amber: The traffic meter is enabled and the traffic limit is almost reached. Off: No Ethernet cable is connected between the router and the modem. Solid white: The 2.4 GHz WiFi radio is operating. Blinking white: The router is sending or receiving WiFi traffic. Off: The 2.4 GHz WiFi radio is off. 5 GHz WiFi LED Solid white: The 5 GHz WiFi radio is operating. Blinking white: The router is sending or receiving WiFi traffic. Off: The 5 GHz WiFi radio is off. 6 GHz WiFi LED Solid white: The 6 GHz WiFi radio is operating. Blinking white: The router is sending or receiving WiFi traffic. Off: The 6 GHz WiFi radio is off. LAN ports 1-4 LEDs The LED color indicates the speed: white for 1 Gbps Ethernet connections and amber for 100 Mbps or 10 Mbps Ethernet connections. Solid white: The router detected a 1 Gbps link with a powered-on device. Blinking white: The port is sending or receiving traffic at 1 Gbps. Solid amber: The router detected a 100 Mbps or 10 Mbps link with a powered-on device. Blinking amber: The port is sending or receiving traffic at 100 Mbps or 10 Mbps. Off: No device is connected to this Ethernet port. Hardware Setup 12 User Manual