Netgear RAXE290 User Manual - Page 138
USB device requirements, Connect a USB storage device to the router
View all Netgear RAXE290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290 USB device requirements The router works with most USB-compliant external flash and hard drives. For the most up-to-date list of USB devices that the router supports, visit kb.netgear.com/app/answers/detail/a_id/18985/~/readyshare-usb-drives-compatibility-list. Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer can access the USB storage device. Such USB storage devices do not work with the router. The router supports the following file system types for full read/write access: • FAT16 • FAT32 • NTFS • NTFS with compression format enabled • Ext2 • Ext3 • Ext4 • HFS • HFS+ Connect a USB storage device to the router ReadySHARE lets you access and share USB storage devices that are connected to a USB port on the router. (If your USB storage device uses special drivers, it is not compatible.) To connect a USB device: 1. Insert your USB storage device into a USB port on the router. 2. If your USB storage device uses a power supply, connect it. You must use the power supply when you connect the USB storage device to the router. When you connect the USB storage device to the router USB port, it might take up to two minutes before it is ready for sharing. By default, the USB storage device is available to all computers on your local area network (LAN). Share USB Storage Devices 138 Attached to the Router User Manual