Symantec 10521148 Implementation Guide - Page 60
AppA AppB, Port group 0, Port 0, In-line pair 0, In-line Bypass unit
View all Symantec 10521148 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
52 Installing the 7100 Series Cabling Figure 4-4 depicts a 2 In-line Bypass unit deployed with a 7120 and other network devices. Figure 4-4 2 In-line Bypass unit deployed with 7120 2 In-line Bypass unit AppA AppB NetA NetB Port group 0 Port group 1 7120 0 - Port 0 1 - Port 1 2 - Port 2 3 - Port 3 4 - In-line pair 0 5 - In-line pair 1 Note: Follow the cabling instructions carefully to match each in-line interface pair with its associated port group on the bypass unit. Connect in-line pair 0 (ports 0/1 on the appliance) to port group 0 on the bypass unit. Connect in-line pair 1 on the 7120 to port group 1 on the bypass unit. The Net A port of each port group on the bypass unit is implemented as 10/100/1000Base-TX. You may need a crossover cable to connect Net A to some devices. This is more likely when connecting Net A to an older switch that does not provide automatic pair reversal. The Net B port of each port group is