Panasonic WJHD316A WJHD309A User Guide - Page 100
[Network], Line Speed, IP Address, Subnet Mask, Gateway
View all Panasonic WJHD316A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
[Screenshot 5] The motion detection area is set with the start point and the end point as the points at opposite angles of the motion detection area. I [Network] Perform the settings for the network such as the IP address and the gateway address when operating this unit a PC via a network such as a LAN. SETUP MENU Quick Display REC & Event Network I Line Speed I HTTP Port Number I DHCP I IP Address I Subnet Mask I Gateway LIVE AUTO 00080 OFF 192 168 000 250 255 255 255 000 192 168 000 001 n Repeat steps 4 and 5 to set another motion detection area. Up to 4 areas can be set. The newly created areas will be named automatically as A, B, C and D in the order of creation. m To complete the settings, rotate the jog dial to select "EXIT" on the status bar, and press the SET button. [Screenshot 6] The "VMD Setup" window will be closed and the "VMD Setup" pop-up menu will be displayed. SETUP MENU Quick Display I REC Type REC & EventVMD Network SCIIeAtRRMuEep1sCoCluatmioOenrFaF CIAMMa2nual REOCN CAMR3EC RaOteFF CAMQ4uality OFF CCCCIAAAAEMMMMvRQ5678eEunCatlRiRtyEaOOOOCteFFFFFFFF Time Operation Mode CAM9 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM16 Advanced Menu I Event Setup I Power ON Manual REC I VMD Setup LIVE QUICK SETUP OFFFIELD OFF OF3F0ips / 16CH OFFFQB OFF OOOFFF3FFFF0QiBps / 16CH 30s ALARM SETUP OFF SETUP , Press the SETUP/ESC button. → The "VMD Setup" pop-up menu will be closed. Notes: • Refer to page 115 for descriptions of how to delete the motion detection area. • It is possible to set the sensitivity and the detection mode (method of detection) of each detection area. Refer to page 115 for further information. Advanced Menu 8 Line Speed The following are available for "Line Speed". AUTO: Line speed will be applied automatically. 10-HALF: 10 Mbps half duplex 10-FULL: 10 Mbps full duplex 100-HALF: 100 Mbps half duplex 100-FULL: 100 Mbps full duplex Note: When the SETUP MENU is closed after changing the line speed, the unit will automatically restart. 8 HTTP Port Number Specify the HTTP port number to be used to transfer images from this unit. It is not necessary to change it for normal use. 8 DHCP Select ON or OFF whether or not to use the DHCP server. When obtaining IP addresses, net mask and a gateway address from the DHCP server, set to ON. If not, set to OFF and enter those addresses manually. ON: Uses the DHCP server. OFF: Does not use the DHCP server. 8 IP Address Enter an IP address when OFF is selected for "DHCP". For this unit, enter 4 units from the decimal numbers (0254). 8 Subnet Mask Enter a subnet mask according to the network configuration when OFF is selected for "DHCP". 8 Gateway Enter the gateway address according to the network configuration when OFF is selected for "DHCP". 100