Panasonic WJHD316A WJHD309A User Guide - Page 21

RECORDING (Emergency Recording) Record manually using an external switch at an emergency event occurrence. For example, install an external switch at the reception counter, and start recording with it when a suspicious individual appears. Refer to a system administrator about the required settings for emergency recording. External switch z MONITOR1 MONITOR2 TIMER 123 4 STOP PLAY PAUSE REC - REC STOP RE ALARM ALARM SUSPEND ERROR ALARM RESET SHIFT SEQ OSD 567 8 DISK SELECT COPY TEXT MARK PAN/ TILT ZOOM/ FOCUS GOTO LAST SEARCH PAN/TILT A-B SLOW REPEAT SETUP /ESC - 9 10/0 11 12 IRIS LISTED OPERATE HDD 1 EL-ZOOM LOGOUT LOGOUT PRESET /AUTO HDD 2 13 14 15 16 SET BUSY x z Press the external switch. The indicator on the REC button will light and recording will start. With the default setting, recording will be performed for 10 seconds. Emergency recording is the highest priority. Emergency recording will be performed even when this unit is recording in other recording modes. • When starting emergency recording while another recording with a different recording mode (except event recording) is being performed, the indicator on the REC button will remain lit and the other recording will resume after the emergency recording has finished. G Recording duration of emergency recording Recording duration of emergency recording can be set as follows. Refer to a system administrator for further information. Parameter Recording Duration 1 s - 10 s 20 s 30 s 1 min - 10 m3in16 20 min - 60 min MANUAL CONTINUE Record for the selected time (1 - 10 seconds, can be set in 1 second intervals) Record for 20 seconds Record for 30 seconds Record for the selected time (1 -10 minutes can be set in 1 minute intervals) Record for the selected time (20 - 60 minutes, can be set in 10 minutes intervals) Record only while the external switch is being pressed down (Record for at least 8 seconds) Record until the ALARM RESET button is pressed x Stop recording. When the recording duration set in advance has passed, recording will stop automatically. With the default setting, recording will stop automatically after recording for 10 seconds. When "CONTINUE" is selected for "Recording Time" of "Emergency REC" on the SETUP MENU (Recording), press the ALARM RESET button to stop recording. The indicator on the REC button will go off and recording will stop. Notes: • The camera selection button will light orange (currently recording) or blue (currently being recorded and displayed on the monitor) to indicate which camera is being recorded. 21