Panasonic WJHD316A WJHD309A User Guide - Page 175
Check if Disk End Mode is set to STOP., Network Setup
View all Panasonic WJHD316A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Problem The available disk space of HDD is not displayed. Check item/Remedy • Check if "Disk End Mode" is set to STOP. • Check if there is a partition in the HDD. Page Refer to p. 136. - The available disk space of HDD is not displayed on the right bar. • Check if the "Disk End Mode" is set to STOP. • Check if there is a partition in the HDD. Refer to p. 136. - Cannot establish a connection via the network. • Check the network settings of the unit and PC. Refer to the Network Setup Instructions (PDF). • Check the host registration setting. When host authentication is set to ON, you cannot establish the connection from computers other than the PC registered as the host. Refer to p. 108 and 133. Response or Image update takes time. • Check if the network is crowded. - Rebooting of the unit occurs while displaying the splash startup screen. When the unit fails to find all of the connected extension units (WJ-HDE300 series) previously mounted for the following rea- sons, it may take time to start up because the unit will be restarted while displaying the splash startup screen. They are normal operations. - • When dedicated cables connecting the unit and the extension units are not firmly connected or detached • When all of the extension units previously mounted are disconnected Inspect the power cord, power plug and connectors periodically. The power cord insulation is damaged. The power cord, plug and connectors get hot during use. The power cord gets hot when bent or stretched. • The power cord, plug and connectors are worn out. This may result in electric shock or a fire. Unplug the power plug from the AC outlet immediately, and refer to qualified service personnel. 175