Panasonic WJHD316A WJHD309A User Guide - Page 98

The following are available for the image quality. SFA/SFB: Top quality (SUPER FINE) FQA/FQB: High quality (FINE) NQA/NQB: Standard quality (NORMAL) EXA/EXB: Low quality (EXTENDED) **A is suitable for less dynamic images. **B is suitable for more dynamic images. 8 Event REC Perform the recording rate (REC Rate) and the image quality (Quality) for event recording (recording to be performed at event occurrence (motion detection, video loss, terminal/ command alarm and terminal alarm)). The following are available for "REC Rate" (recording rate). OFF/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/ 60 ips/120 ips Note: The camera channel number selected for "REC Camera" will be displayed next to the selected recording rate. Note: The available recording rate differs depending on the selected solution. Resolution FRAME 3D ON/FRAME 3D OFF FIELD SIF Maximum recording rate 30 ips 60 ips 120 ips The following are available for "Quality" (image quality). SFA/SFB: Top quality (SUPER FINE) FQA/FQB: High quality (FINE) NQA/NQB: Standard quality (NORMAL) EXA/EXB: Low quality (EXTENDED) **A is suitable for less dynamic images. **B is suitable for more dynamic images. The following are available for "Time" (recording duration). 1 s - 10 s (in 1 second intervals)/20 s/30 s/1 min - 10 min (in 1 minute intervals)/20 min/30 min/ 40 min/ 50 min/ 60 min MANUAL: Recording duration differs depending on the event type as follows; When a motion is detected: Recording will be per- formed for 8 seconds When a video loss has occurred: Recording will be performed while the video signal is lost. When a terminal alarm has occurred: Recording will be performed while the alarm signal is being supplied. When a command alarm has occurred: Recording will be performed for 8 seconds. CONTINUE: Record until the ALARM RESET button is pressed. 98 Note: When "MANUAL" is selected for "Time" (recording duration), recording will be performed for at least 8 seconds at an event occurrence as long as the alarm is not canceled. The following are available for "Operation Mode" (event action mode). Refer to page 49 for further information about each event action mode. ACT DET (Activity Detection Mode): Performs only recording, writing an event log and camera movement to a preset position at an event occurrence. Other event actions will not be performed. ALARM (Alarm Mode): Performs every event action according to the settings. OFF: Performs only recording of the event log. Other event actions will not be performed. 8 Event Setup Perform the settings for the alarm output duration and the buzzer sound duration for each event type (motion detection, video loss, command alarm and terminal alarm). [Screenshot 1] Start operation from the "REC & Event" menu. SETUP MENU Quick Display REC & Event Network I REC Type I REC Camera I Resolution I Manual REC REC Rate Quality I Event REC REC Rate Quality Time Operation Mode Advanced Menu I Event Setup I Power ON Manual REC I VMD Setup LIVE QUICK SETUP FIELD 30ips / 16CH FQB 30ips / 16CH FQB 30s ALARM SETUP OFF SETUP z Move the cursor to "Event Setup" using the arrows button (C D) and press the SET button. [Screenshot 2] The "Event Setup" pop-up menu will be displayed. SETUP MENU Quick Display I REC Type REC & EventEvIenVtIISMeDRRtuEepsCoCluatmioenra Network I VIiABdluMeazoRrazmnLEeuorCOasulRsRtapEtueCt AlaQrmuaOliutytput IBuEzvzeenrt REC I TermRinEaCl/CRoamtemand Alarm AlaQrmuaOliutytput BuzTzimere Operation Mode Advanced Menu I Event Setup I Power ON Manual REC I VMD Setup LIVE QUICK SETUP OFFIEFLD OFF 3-0-ips / 16CH F2QsB 320sips / 16CH F2QsB 30s ALARM SETUP OFF SETUP x Move the cursor to the item to be set using the arrows button (C D), and rotate the jog dial to select the parameter. The following are available for "Alarm Output" (alarm output duration). When OFF is selected, the alarm output will not be supplied. (s: second, min: minute) OFF: No alarm output is supplied.