Dell PowerConnect B-RX16 Installation Guide - Page 26
Gigabit Ethernet interface module (SFP), TABLE 5
View all Dell PowerConnect B-RX16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1 Hardware features The following optic modules versions are available from Brocade: • Short wavelength (86 - 300 meters) - Brocade part number 10G-XFP-SR • Long wavelength (10 kilometers) - Brocade part number 10G-XFP-LR • Extra long wavelength (40 kilometers) - Brocade part number 10G-XFP-ER Gigabit Ethernet interface module (SFP) The 24-port 1 Gigabit Ethernet mini-GBIC (or SFP) is auto-sensing, auto-negotiating Ethernet port and will select the FE or GE mode of operation based on the link signal received. NOTE The device will be FE or GE capable, but will only display that is GE to indicate the maximum speed capability of the module. NOTE The actual speed will be displayed once the link is seen and the port auto-senses the speed of the SFP. You can issue the show media command to display the type of optic installed and determine the speed the port will run at when the link is received. Figure 8 shows the 24-port 1 Gigabit Ethernet mini-GBIC (or SFP) module's front panel. FIGURE 8 24-port 1 Gigabit Ethernet SFP module front panel 1 1 Port status LEDs The front panel includes the following control features: • LEDs • 24 1-Gigabit Ethernet mini-GBIC (SFP) ports TABLE 5 Gigabit Ethernet module LEDs Position State Meaning Below each Ethernet port (left-side LED supports port in top row while right-side LED supports port in bottom row) On or blinking Off for an extended period The port is transmitting and receiving packets. The port is not transmitting or receiving packets. 14 BigIron RX Installation Guide 53-1001811-01