HP 3015 Service Manual - Page 134
CAUTION, Remove the separation pad assembly 1 of 3
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
CAUTION Note 2. Remove four screws (callout 1) and the sheet-metal plate. Do not touch the grey separation pad. Skin oils and fingerprints on the separation pad might cause paper-feed problems. Press down on the plate as the screws are removed. There are four compression springs under the plate. The separation pad assembly also has one compression spring attached to the shield. Do not loose any springs when the shield is removed. The separation pad set and the separation pad assembly are two different assemblies. The separation pad set consists of the pad, clear plastic sheet, and the pad cover. The separation pad set is a user replaceable assembly. The separation pad assembly consists of the separation lever, tension spring, feed arm, and the components of the separation pad set. The separation pad assembly is not a user replaceable assembly. Only trained service personnel should attempt to replace the separation pad assembly. Figure 5-21. Remove the separation pad assembly (1 of 3) 116 Chapter 5 Removal and replacement ENWW