HP 3015 Service Manual - Page 235
s are skewed crooked., Parts of the around the edges are not printing
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Pages are skewed (crooked). Cause Solution The media is loaded incorrectly. Reload the media, and make sure that the media guides are not too tight or too loose against the media stack. See Loading media. The media guides are broken or missing. Replace the media input tray or the paper-pickup unit. See Media input tray or Paper-pickup assembly. The ADF input tray is too full. Remove some of the sheets. The HP LaserJet 3015 ADF input tray can hold up to 30 sheets of 75-g/m2 (20-lb) bond-weight paper. Remove some of the sheets. The HP LaserJet 3020 and 3030 ADF input tray can hold up to 50 sheets of 75-g/m2 (20-lb) bond-weight paper. Remove some of the sheets. The HP LaserJet 3015, 3020, and 3030 main input tray can hold up to 150 sheets of 75-g/m2 (20-lb) bond-weight paper. The type and quality of media does not meet HP specifications. Make sure that the media meets specifications detailed in the HP LaserJet Printer Family Print Media Guide. Parts of the page around the edges are not printing. ENWW Cause Solution The product cannot print to the edge of the paper. To fit the image into this printable area, slightly The printer has minimum margins on each edge reduce the size of the image. of 6 mm (0.25 inch). If copying, the reduction setting is incorrect. Copied images will be clipped if the image on the original is too close to the edge of the original. The paper size setting is incorrect. Set the correct page size on the control-panel menu. Solving scanning (copying) image-quality problems 217