HP 3015 Service Manual - Page 229
The toner is loose, and it does not stay attached to the printed
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
The toner is loose, and it does not stay attached to the printed page. Cause The inside of the printer is dirty. The media does not meet HP specifications (for example, it is too moist or too rough). The driver is not set for the correct media. The power strip is not working correctly. The fuser temperature is too low. The fuser temperature varies according to the media type being used. The fuser film is torn or has holes. The fuser film is damaged. The print cartridge needs to be replaced. Solution Clean the print path. See, Cleaning the product and Cleaning the print-cartridge area. Make sure that the media meets specifications detailed in the HP LaserJet Printer Family Print Media Guide. 1. On the Paper tab of the printer driver, under Type is:, select the correct media type from the drop-down list. 2. Select the correct media by using the HP Toolbox. Plug the product directly into an working ac outlet. In the Paper tab of the printer driver, under Type is:, select the correct media type from the dropdown list. If the error persists, replace the ECU. See, Engine controller unit. Replace the fuser. See, Fuser. Check the fuser film for tears or holes. Replace the fuser if necessary. See, Fuser. Replace the print cartridge. ENWW Solving image-quality problems 211