HP 3015 Service Manual - Page 211
Control-panel messages, Alert and warning messages, HP LaserJet 3015 and 3030 only
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Control-panel messages Note Note Note The majority of the control-panel messages are intended to guide the user through normal operation. The control-panel messages indicate the status of the current operation, and include a page count on the second line of the display, if appropriate. When the product is receiving fax data, print data, or scanning commands, control-panel messages indicate this status. In addition, alert messages, warning messages, and critical error messages indicate situations that might require some action. HP LaserJet 3015 and 3030 only: This product has been tested with the supplied two-wire telephone cord to meet RJ11 specifications. If you are experiencing faxing problems, make sure that the supplied phone cord or an equivalent cord is installed. Alert and warning messages Alert and warning messages appear temporarily and might require the user to acknowledge the message by pressing MENU/ENTER to resume or by pressing CANCEL to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the product will attempt to resume the printing job after the warning has appeared for 10 seconds without acknowledgement. Some control-panel error messages might not apply to the product being serviced, and therefore they will not appear on the control-panel display. For example, fax error messages will not appear on the control-panel display for the HP LaserJet 3020 all-in-one product. Event-log codes are not listed here. For a list of event-log codes, see Event-log codes. Table 6-1. Alert and warning messages Control panel message ###: [Group Name] Phbook/ SpeedDial (HP LaserJet 3015 and 3030 only) Event log Description error message None The product is waiting for the programmed one-touch button to be pressed or add a speed-dial code to a group-dial code. Recommended action Begin adding fax numbers to the group-dial code. See "To manage group-dial entries" in the fax guide on the product CD. Canceled copy. Clear document None Canceled scan. Clear document None The CANCEL button was pressed to cancel the current job while pages were feeding from the document feeder. The cancel process will not automatically clear the document feeder. Open the ADF cover or raise the flatbed lid (HP LaserJet 3020 and 3030 only), remove the jammed item, and close the door or lid. Then, clear the items in the document feeder tray and start over. The CANCEL button was pressed to cancel the current job while pages were feeding from the document feeder. The cancel process will not automatically clear the document feeder. Open the ADF cover or raise the flatbed lid (HP LaserJet 3020 and 3030 only), remove the jammed item, and close the door or lid. Then, clear the items in the document feeder tray and start over. ENWW Control-panel messages 193