HP 3015 Service Manual - Page 64

2. Close the flatbed scanner cover and put the top end of the stack of originals into the ADF input tray, with the media stack face-up and the first page to be copied on top of the stack. Figure 2-10. Loading the LJ 3020 and 3030 ADF (1 of 2) 3. Slide the stack into the ADF until it does not move any farther. 4. Adjust the media guides until they are snug against the media. Figure 2-11. CAUTION Loading the LJ 3020 and 3030 ADF (2 of 2) 5. The document is now ready to be copied. To prevent damaging the device, do not use an original that contains correction tape, correction fluid, or staples. Loading originals onto the LJ 3020 and 3030 flatbed scanner 1. Make sure that the automatic document feeder (ADF) contains no media. 2. Lift the flatbed scanner cover. 3. Place the original document face-down on the flatbed scanner with the top, left corner of the document at the lower-right corner of the glass. 4. Gently close the lid. 5. The document is ready to be copied. Figure 2-12. CAUTION Loading the LJ 3020 and 3030 flatbed scanner To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner surface. Always close the scanner lid when the device is not in use. 46 Chapter 2 Operation ENWW