HP 3015 Service Manual - Page 80
HP LaserJet 3015 ADF separation pad set, HP LaserJet 3015 ADF input tray, CAUTION, - paper feed problems
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Note CAUTION HP LaserJet 3015 ADF separation pad set The separation pad set and the separation pad assembly are two different assemblies. The separation pad set consists of the pad, clear plastic sheet, and the pad cover. The separation pad set is a user replaceable assembly. The separation-pad assembly consists of the separation lever, tension spring, feed arm, and the components of the separation pad set. The separation-pad assembly is not a user replaceable assembly. Only trained service personnel should attempt to replace the separation-pad assembly. 1. Use the power switch to turn the product off and unplug the power cord. 2. Open the scanner top cover. 3. Carefully push the replacement separation pad set onto the guide assembly. Close the ADF lid. When installing the replacement pad, be careful not to bend or break the retainer-clip pins. Do not touch the grey separation pad. Skin oils and fingerprints on the separation pad might cause paper-feed problems. Figure 3-29. Remove the separation pad 4. Plug the product in, and then use the power switch to turn on the product. HP LaserJet 3015 ADF input tray 1. Rotate the ADF input tray toward the front of the product. 62 Chapter 3 Maintenance ENWW