HP 3015 Service Manual - Page 76
Replacing the pickup roller 4 of 7 - pull roller
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. Gently pull the pickup roller up and out. Figure 3-18. Hint Replacing the pickup roller (4 of 7) 6. Position the cleaned or replacement pickup roller in the slots on the pickup roller frame. Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup roller. Figure 3-19. Note Replacing the pickup roller (5 of 7) 7. Rotate the top of the pickup roller into position until the white tabs on each side of the roller snap into place. Touching the transfer roller can damage the product. Figure 3-20. Replacing the pickup roller (6 of 7) 8. Reinstall the print cartridge and close the print-cartridge door. 9. Plug the product in, and then use the power switch to turn on the product. Figure 3-21. Replacing the pickup roller (7 of 7) 58 Chapter 3 Maintenance ENWW