HP 3015 Service Manual - Page 70
Cleaning the LJ 3020 and 3030 lid backing, CAUTION
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
2. Clean the glass by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. Figure 3-3. CAUTION Cleaning the LJ 3020 and 3030 glass (1 of 2) Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the device; these can damage the device. Do not place liquids directly on the glass. They might seep and damage the device. 3. Clean the scanner strip by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. Figure 3-4. Note Cleaning the LJ 3020 and 3030 glass (2 of 2) 4. To prevent spotting, dry the glass by using a chamois or cellulose sponge. 5. Plug the product in and use the power switch to turn on the product. Cleaning the LJ 3020 and 3030 lid backing Debris can accumulate on the white document lid backing that is located underneath the device lid. 1. Use the power switch to turn off the device, unplug the power cord from the electrical socket, and raise the lid. Turn the power switch to the off position. 2. Clean the white document lid backing by using a soft cloth or sponge that has been moistened with a mild soap and warm water. Figure 3-5. Cleaning the LJ 3020 and 3030 lid backing 3. Wash the backing gently to loosen debris; do not scrub the backing. 52 Chapter 3 Maintenance ENWW