HP 3015 Service Manual - Page 281
Developer’s menu, Ready, Service reports, DS-Fax
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Note ENWW 5. To exit the secondary service menu and remove it from the menu tree, press CANCEL to return to the Ready display, and then press CANCEL again. To print a list of all the Fax data-store parameters 1. From the secondary service menu, use the < or > button to select Service reports, and press MENU/ENTER. 2. Use the < or > button to select DS-Fax, and press MENU/ENTER. Developer's menu Use the developer's menu to adjust fax data-store parameters and to run various tests. The following is a hierarchical diagram of the developer's menu. Main menu Developer's menu Submenu Display test Read Register Write Register R/W parameter Monitor test LIU test Loopback test Data Store Transmit test Submenu Onhook monitor Offhook monitor Eavesdrop Test Signal Pwr Mon. LIU inputs LIU ID OFFHOOK ONHOOK DIAL NUMBER Note Several other options are available under this menu. To gain access to the developer's menu: 1. Make sure that the control-panel display reads Ready. 2. Press MENU/ENTER. 3. Press the * and # buttons simultaneously. You can gain access to the developer's menu from any other menu by pressing the * and # buttons simultaneously. Service-mode functions 263