HP 3015 Service Manual - Page 31

Table 1-7. Skew specifications (all models) (continued) Category Specification First line/leading edge skew: the distance of the first scan line from the leading edge of the media. 4.23 mm (0.16 inch) ± 2.0 mm (0.07 inch) for cut-sheet media. 4.23 mm (0.16 inch) ± 2.5 mm (0.09 inch) for thick media over 105-g/m2 (28 pounds). 15.0 mm (0.59 inch) ± 3.5 mm (0.13 inch) for envelopes and postcards. Left margin: the distance of the left-most vertical line (first two dots of each scan line) from the left edge of the media. 4.23 mm (0.16 inch) ± 2.0 mm (0.07 inch) for cut-sheet media. 15.0 mm (0.59 inch) ± 3.5 mm (0.13 inch) for envelopes and postcards. Parallelism All vertical lines must be parallel within an absolute value of 2 percent (1.5 mm [0.05 inch] over a 250 mm [9.85 inch] length for cut-sheet media). HP LaserJet 3030 fax capabilities Table 1-8. HP LaserJet 3030 fax capabilities Category Specification Fax transmission speed Right/left margins for printed pages 3 seconds/page (ITU-T Test Image #1) 6.3 mm (0.25 inch) Top/bottom margins for printed 5.08 mm (0.2 inch) pages Fax compatibility ITU Group 3; ECM Fax coding schemes Modem speed Speed dialing Distinctive ring detect Fax resolution (standard) MH, MR, and MMR Up to 33,600 bits per second (bps) Yes Yes 203 by 98 dpi Fax resolution (fine) Fax resolution (superfine) 203 by 196 dpi 300 by 300 dpi (no halftone) Fax resolution (photo) Fax page storage 300 by 300 dpi (halftone enabled) Up to 110 slerexe pages ENWW Product specifications 13