HP 3015 Service Manual - Page 192
Remove the formatter 1 of 2 and LIU installed, Remove the formatter 2 of 2
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Note 4. Remove 4 screws from the formatter PCA (callout 2). For the LJ 3015 and 3030, remove three screws (callout 3) from the LIU. Remove the formatter and any LIU PCAs. If the LIU on the LJ 3015 or 3030 product is being replaced, separate the formatter from the LIU by gently pulling them apart. Reinstallation tip When reinstalling the formatter, make sure that the upper mounting leg on the I/O plate (the cover that surrounds the parallel and USB port) is fastened to the formatter when the top-right formatter screw in callout 2 is installed Figure 5-127. Remove the formatter (1 of 2) (and LIU installed) 5. Gently separate the formatter from the sheet-metal shield. Mount the replacement formatter to this shield. Figure 5-128. Remove the formatter (2 of 2) 174 Chapter 5 Removal and replacement ENWW