HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 11
arp static, Parameters, Usage guidelines, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Parameters ip-address: Specifies an IP address for the multiport ARP entry. mac-address: Specifies a MAC address for the multiport ARP entry, in the format of H-H-H. vlan-id: Specifies a VLAN for the multiport ARP entry, in the range of 1 to 4094. vpn-instance vpn-instance-name: Specifies an MPLS L3VPN for the multiport ARP entry. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. The specified VPN instance must already exist. Without this option, the multiport ARP entry belongs to the public network. Usage guidelines The specified VLAN must already exist. If the specified VLAN or the corresponding VLAN interface is removed, the multiport ARP entry is also removed. The specified IP address must reside on the same subnet as the virtual interface of the specified VLAN. Otherwise, the multiport ARP entry does not take effect. To use the multiport ARP entry, you must also configure a multicast or multiport unicast MAC address entry that has the same MAC address and VLAN ID as the multiport ARP entry to specify multiple output interfaces. Examples # Configure a multiport ARP entry that comprises IP address 202.38.10.2 and MAC address 00e0-fc01-0000 in VLAN 10. system-view [Sysname] arp multiport 202.39.10.2 00e0-fc01-0000 10 Related commands • display arp multiport • reset arp multiport arp static Use arp static to configure a static ARP entry. Use undo arp to remove an ARP entry. Syntax arp static ip-address mac-address [ vlan-id interface-type interface-number ] [ vpn-instance vpn-instance-name ] undo arp ip-address [ vpn-instance-name ] Default No static ARP entries are configured. Views System view Predefined user roles network-admin Parameters ip-address: Specifies the IP address in an ARP entry. 3