HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 13
display arp, Default, Views, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Default The aging timer for dynamic ARP entries is 20 minutes. Views System view Predefined user roles network-admin Parameters aging-time: Sets the aging timer for dynamic ARP entries, in the range of 1 to 1440 minutes. Usage guidelines Each dynamic ARP entry in the ARP table has a limited lifetime, called aging timer. The aging timer of a dynamic ARP entry is reset each time the dynamic ARP entry is updated. Dynamic ARP entries that are not updated before their aging timers expire are deleted from the ARP table. Set the aging timer for dynamic ARP entries as needed. For example, when you configure proxy ARP, set a short aging time so that invalid dynamic ARP entries can be deleted timely. Examples # Set the aging timer for dynamic ARP entries to 10 minutes. system-view [Sysname] arp timer aging 10 Related commands display arp timer aging display arp Use display arp to display ARP entries. Syntax display arp [ [ all | dynamic | multiport |static ] [ slot slot-number ] | vlan vlan-id | interface interface-type interface-number ] [ count | verbose ] Views Any view Predefined user roles network-admin network-operator Parameters all: Displays all ARP entries. dynamic: Displays dynamic ARP entries. multiport: Displays multiport ARP entries. static: Displays static ARP entries. slot slot-number: Displays the ARP entries of an IRF member device. The slot-number argument specifies the ID of the IRF member device. 5