HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 197
ipv6 neighbor
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Syntax ipv6 nd router-preference { high | low | medium } undo ipv6 nd router-preference Default The router preference is medium. Views Interface view Predefined user roles network-admin Parameters high: Sets the router preference to the highest. low: Sets the router preference to the lowest. medium: Sets the router preference to the medium. Usage guidelines A hosts selects a router with the highest preference as the default router. When router preferences are the same in RA messages, a host selects the router corresponding to the first received RA message as the default gateway. Examples # Set the router preference in RA messages to the highest on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 nd router-preference high ipv6 neighbor Use ipv6 neighbor to configure a static neighbor entry. Use undo ipv6 neighbor to remove a static neighbor entry. Syntax ipv6 neighbor ipv6-address mac-address { vlan-id port-type port-number | interface interface-type interface-number } [ vpn-instance vpn-instance-name ] undo ipv6 neighbor ipv6-address interface-type interface-number Default No static neighbor entry is configured. Views System view Predefined user roles network-admin 189