HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 125

Field Password Method SSL client policy Interval Description Password to be included in the URL address for DDNS update requests. This field is blank if no password is configured and displays ****** if a password is configured. Parameter transmission method used to send HTTP/HTTPS-based DDNS update requests. Method types include GET and POST. Name of the associated SSL client policy. This field is blank if no SSL client policy is associated. Interval for sending DDNS update requests. Related commands ddns policy interval Use interval to specify the interval for sending DDNS update requests after DDNS update is enabled. Use undo interval to restore the default value. Syntax interval days [ hours [ minutes ] ] undo interval Default The DDNS update request interval is one hour. Views DDNS policy view Predefined user roles network-admin Parameters days: Days in the range of 0 to 365. hours: Hours in the range of 0 to 23. minutes: Minutes in the range of 0 to 59. Usage guidelines A DDNS update request is initiated immediately after the primary IP address of the interface changes or the link state of the interface changes from down to up. If you set the interval to 0, the device does not periodically initiate any DDNS update request, but initiates a DDNS update request when the primary IP address of the interface changes or the link state of the interface changes from down to up. If you use the interval command multiple times with different time intervals, the most recent configuration takes effect. If you change the interval for an applied DDNS policy, the device immediately initiates a DDNS update request and sets the interval as the update interval. 117