HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 169
display ipv6 pathmtu, Parameters, Examples, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
network-operator Parameters vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. The VPN must already exist. count: Displays the total number of neighbor entries in the specified VPN. Examples # Display neighbor information about the VPN vpn1. display ipv6 neighbors vpn-instance vpn1 Type: S-Static D-Dynamic I-Invalid IPv6 Address Link Layer VID Interface State T Age FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A M-GE0/0/0 REACH IS - Table 40 Command output Field IPv6 Address Link-layer VID Interface State T Age Description IPv6 address of a neighbor. Link layer address (MAC address) of a neighbor. VLAN to which the interface connected with a neighbor belongs. Interface connected with a neighbor. Neighbor state: • INCMP-The address is being resolved. The link layer address of the neighbor is unknown. • REACH-The neighbor is reachable. • STALE-Whether the neighbor is reachable is unknown. The device does not verify the reachability any longer unless data is sent to the neighbor. • DELAY-Whether the neighbor is reachable is unknown. The device sends an NS message after a delay. • PROBE-Whether the neighbor is reachable is unknown. The device sends an NS message to verify the reachability of the neighbor. Neighbor information type: • S-Statically configured. • D-Dynamically obtained. • I-Invalid. A hyphen (-) indicates a static entry. For a dynamic entry, this field displays the elapsed time in seconds. If the neighbor is never reachable, this field displays a pound sign (#). display ipv6 pathmtu Use the display ipv6 pathmtu command to display IPv6 Path MTU information. Syntax display ipv6 pathmtu [ vpn-instance vpn-instance-name ] { ipv6-address | { all | dynamic | static } [ count ] } 161