HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 238
display interface tunnel
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Examples # VLAN-interface 100 of Sysname 1 uses the IP address 193.101.1.1 and VLAN-interface 100 of Sysname 2 uses the IP address 192.100.1.1. Configure the source address 193.101.1.1 and destination address 192.100.1.1 for the tunnel interface of Sysname 1. system-view [Sysname1] interface tunnel 1 mode ipv6-ipv4 [Sysname1-Tunnel1] source 193.101.1.1 [Sysname1-Tunnel1] destination 192.100.1.1 # Configure the source address 192.100.1.1 and destination address 193.101.1.1 for the tunnel interface of Sysname 2. system-view [Sysname2] interface tunnel 1 mode ipv6-ipv4 [Sysname2-Tunnel1] source 192.100.1.1 [Sysname2-Tunnel1] destination 193.101.1.1 Related commands • display interface tunnel • interface tunnel • source display interface tunnel Use display interface tunnel to display information about tunnel interfaces, including the source address, destination address, and tunnel mode. Syntax display interface [ tunnel [ number ] ] [ brief [ description ] ] Views Any view Predefined user roles network-admin network-operator Parameters number: Number of a tunnel interface. brief: Displays brief interface information. If you do not specify this keyword, the command displays detailed interface information. description: Displays the entire user configured interface description. Without this keyword, the command can display the first 27 characters if the description string contains more than 27 characters. Usage guidelines If you do not specify the tunnel keyword, this command displays information about all interfaces on the device. If you specify the tunnel keyword without the number argument, this command displays information about all existing tunnel interfaces. 230