HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 234

Related commands display ipv6 dhcp pool temporary address range Use temporary address range to configure a temporary IPv6 address range in a DHCPv6 address pool for dynamic allocation. Use undo temporary address range to remove the temporary IPv6 address range from the address pool. Syntax temporary address range start-ipv6-address end-ipv6-address [ preferred-lifetime preferred-lifetime valid-lifetime valid-lifetime ] undo temporary address range Default No temporary IPv6 address range is configured in an address pool. Views DHCPv6 address pool view Predefined user roles network-admin Parameters start-ipv6-address: Specifies the start IPv6 address. end-ipv6-address: Specifies the end IPv6 address. preferred-lifetime preferred-lifetime: Specifies the preferred lifetime. The value range is 60 to 4294967295 seconds, and the default is 604800 seconds (7 days). valid-lifetime valid-lifetime: Specifies the valid lifetime. The value range is 60 to 4294967295 seconds, and the default is 2592000 seconds (30 days). The valid lifetime cannot be shorter than the preferred lifetime. Usage guidelines If you do not execute the temporary address range command, the DHCPv6 server does not support temporary address assignment. You can configure only one temporary IPv6 address range in an address pool. If you use the command multiple times, the most recent configuration takes effect. Examples # In DHCPv6 address pool 1, configure a temporary IPv6 address range from 3ffe:501:ffff:100::50 to 3ffe:501:ffff:100::60. system-view [Sysname] ipv6 dhcp pool 1 [Sysname-dhcp6-pool-1] network 3ffe:501:ffff:100::/64 [Sysname-dhcp6-pool-1] temporary address range 3ffe:501:ffff:100::50 3ffe:501:ffff:100::60 Related commands • display ipv6 dhcp pool 226