HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 72
dhcp relay client-information refresh, Syntax, Default, Views, Predefined user roles, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Syntax dhcp relay client-information record undo dhcp relay client-information record Default The DHCP relay agent does not record client information in relay entries. Views System view Predefined user roles network-admin Usage guidelines Disabling recording of client information deletes all recorded relay entries. Examples # Enable recording of relay entries on the relay agent. system-view [Sysname] dhcp relay client-information record Related commands • dhcp relay client-information refresh • dhcp relay client-information refresh enable dhcp relay client-information refresh Use dhcp relay client-information refresh to configure the interval at which the DHCP relay agent periodically refreshes relay entries. Use undo dhcp relay client-information refresh to restore the default. Syntax dhcp relay client-information refresh [ auto | interval interval ] undo dhcp relay client-information refresh Default The refresh interval is automatically calculated based on the number of relay entries. Views System view Predefined user roles network-admin Parameters auto: Automatically calculates the refresh interval. interval interval: Specifies the refresh interval in the range of 1 to 120 seconds. Usage guidelines If you use this command multiple times, the most recent configuration takes effect. 64