HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 220

ipv6 dhcp pool Use ipv6 dhcp pool to create a DHCPv6 address pool and enter its view. If the pool has been created, you directly enter its view. Use undo ipv6 dhcp pool to remove the specified DHCPv6 address pool. Syntax ipv6 dhcp pool pool-name undo ipv6 dhcp pool pool-name Default No DHCPv6 address pool is configured. Views System view Predefined user roles network-admin Parameters pool-name: Specifies a name for the DHCPv6 address pool, a case-insensitive string of 1 to 63 characters. Usage guidelines A DHCPv6 address pool stores IPv6 address/prefix and other configuration parameters to be assigned to DHCPv6 clients. When you remove a DHCPv6 address pool, binding information for the assigned IPv6 addresses and prefixes in the address pool is also removed. Examples # Create a DHCPv6 address pool named pool1 and enter its view. system-view [Sysname] ipv6 dhcp pool pool1 [Sysname-dhcp6-pool-pool1] Related commands • display ipv6 dhcp pool • ipv6 dhcp server apply pool ipv6 dhcp prefix-pool Use ipv6 dhcp prefix-pool to create a prefix pool, specify the prefix/prefix length for the pool, and specify the assigned prefix length. Use undo ipv6 dhcp prefix-pool to remove the specified prefix pool. Syntax ipv6 dhcp prefix-pool prefix-pool-number prefix prefix/prefix-len assign-len assign-len undo ipv6 dhcp prefix-pool prefix-pool-number 212