HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 32
ip address, Examples, Related commands
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
If you do not specify the interface type and interface number, this command displays brief IP configuration information about all Layer 3 interfaces. If you specify only the interface type, this command displays brief IP configuration information about all Layer 3 interfaces of the specified type. If you specify both the interface type and interface number, this command displays brief IP configuration information about the specified interface. Examples # Display brief IP configuration information about VLAN interfaces. display ip interface vlan-interface brief *down: administratively down (s): spoofing Interface Physical Protocol IP Address Vlan10 down down 6.6.6.1 Vlan2 down down 7.7.7.1 Description Vlan-inte... Vlan-inte... Table 4 Command output Field Description *down: administratively down The interface is administratively shut down with the shutdown command. (s) : spoofing Spoofing attribute of the interface. It indicates that an interface might have no link present even when its link layer protocol is displayed up or the link is set up only on demand. Interface Interface name. Physical Physical state of the interface: • *down-The interface is administratively shut down with the shutdown command. • down-The interface is administratively up but its physical state is down (possibly because of poor connection or line failure). • up-Both the administrative and physical states of the interface are up. Protocol Link layer protocol state of the interface: • down-The protocol state of the interface is down (typically when no IP address is configured for the interface). • up-The protocol state of the interface is up. • up(s)-The protocol state of the interface is up (spoofing). IP Address IP address of the interface. If no IP address is configured, unassigned is displayed. Description Interface description information, a maximum of 12 characters can be displayed. If there are more than 12 characters, only the first nine characters are displayed. Related commands • display ip interface • ip address ip address Use ip address to assign an IP address to the interface. 24