HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 199
ipv6 neighbor stale-aging, Default, Views, Predefined user roles, Usage guidelines, Examples, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
undo ipv6 neighbor link-local minimize Default All ND entries are assigned to the driver. Views System view Predefined user roles network-admin Usage guidelines Perform this command to minimize link-local ND entries assigned to the driver. Link-local ND entries refer to ND entries comprising link-local addresses. By default, the device assigns all ND entries to the driver. With this feature enabled, the device does not add newly learned link-local ND entries whose link local addresses are not the next hop of any route to the driver, saving driver resources. This feature affects only newly learned link-local ND entries rather than existing ND entries. Examples # Minimize link-local ND entries. system-view [Sysname] ipv6 neighbor link-local minimize ipv6 neighbor stale-aging Use ipv6 neighbor stale-aging to set the aging timer for ND entries in stale state. Use undo ipv6 neighbor stale-aging to restore the default. Syntax ipv6 neighbor stale-aging aging-time undo ipv6 neighbor stale-aging Default The aging timer for ND entries in the stale state is 240 minutes. Views System view Predefined user roles network-admin Parameters aging-time: Specifies the aging timer for ND entries in stale state, in the range of 1 to 1440 minutes. Usage guidelines ND entries in stale state have an aging timer. If an ND entry in stale state is not refreshed before the timer expires, it moves to the delay state. If it is still not refreshed in 5 seconds, the ND entry moves to the probe state, and the device sends an NS message for detection for a maximum of three times. If no response is received, the device deletes the ND entry. 191