HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 183
ipv6 address auto link-local, Views, Predefined user roles, Parameters, Examples, Syntax, Default
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Views Interface view Predefined user roles network-admin Parameters ipv6-address: IPv6 anycast address. prefix-length: Prefix length in the range of 1 to 128. Examples # Set the IPv6 anycast address of VLAN-interface 100 to 2001::1 with prefix length 64. Method 1: system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address 2001::1/64 anycast Method 2: system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address 2001::1 64 anycast ipv6 address auto link-local Use ipv6 address auto link-local to automatically generate a link-local address for an interface. Use undo ipv6 address auto link-local to remove the automatically generated link-local address for the interface. Syntax ipv6 address auto link-local undo ipv6 address auto link-local Default No link-local address is configured on an interface, and a link-local address is automatically generated after an IPv6 global unicast address is configured for the interface. Views Interface view Predefined user roles network-admin Usage guidelines Link-local addresses are used for neighbor discovery and stateless autoconfiguration on the local link. Packets using link-local addresses as the source or destination addresses cannot be forwarded to other links. After an IPv6 global unicast address is configured for an interface, an automatically generated link-local address is the same as the one generated by using the ipv6 address auto link-local command. 175