HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 168
display ipv6 neighbors count, display ipv6 neighbors vpn-instance
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Related commands • ipv6 neighbor • reset ipv6 neighbors display ipv6 neighbors count Use display ipv6 neighbors count to display the number of neighbor entries. Syntax display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type interface-number | vlan vlan-id } count Views Any view Predefined user roles network-admin network-operator Parameters all: Displays the total number of all neighbor entries, including neighbor entries created dynamically and configured statically. dynamic: Displays the total number of neighbor entries created dynamically. static: Displays the total number of neighbor entries configured statically. slot slot-number: Displays the total number of neighbor entries on the specified IRF member device. The slot-number argument specifies the ID of the IRF member device. interface interface-type interface-number: Displays the total number of neighbor entries of a specific interface. The interface-type interface-number specifies an interface by its type and number. vlan vlan-id: Displays the total number of neighbor entries in the specified VLAN. The VLAN ID ranges from 1 to 4094. Examples # Display the total number of neighbor entries created dynamically. display ipv6 neighbors dynamic count Total number of dynamic entries: 2 display ipv6 neighbors vpn-instance Use display ipv6 neighbors vpn-instance to display neighbor information about a specific VPN. Syntax display ipv6 neighbors vpn-instance vpn-instance-name [ count ] Views Any view Predefined user roles network-admin 160