HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 158
command removes all, destination servers on the interface.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Predefined user roles network-admin Parameters ip-address: Specifies the IP address of a destination server, in dotted decimal notation. Usage guidelines Specify destination servers on an interface that receives UDP broadcast packets. You can specify a maximum of 20 destination servers on an interface. If you do not specify the ip-address argument, the undo udp-helper server command removes all destination servers on the interface. Examples # Specify the destination server 192.1.1.2 on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] udp-helper server 192.1.1.2 Related commands display udp-helper interface 150
150
Predefined user roles
network-admin
Parameters
ip-address
: Specifies the IP address of a destination server, in dotted decimal notation.
Usage guidelines
Specify destination servers on an interface that receives UDP broadcast packets. You can specify a
maximum of 20 destination servers on an interface.
If you do not specify the
ip-address
argument, the
undo udp-helper server
command removes all
destination servers on the interface.
Examples
# Specify the destination server 192.1.1.2 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] udp-helper server 192.1.1.2
Related commands
display udp-helper interface