HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 47
dhcp server relay information enable, display dhcp server conflict, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
• display dhcp server conflict • reset dhcp server conflict dhcp server relay information enable Use dhcp server relay information enable to enable the DHCP server to handle Option 82. Use undo dhcp server relay information enable to configure the DHCP server to ignore Option 82. Syntax dhcp server relay information enable undo dhcp server relay information enable Default The DHCP server handles Option 82. Views System view Predefined user roles network-admin Usage guidelines Upon receiving a DHCP request containing Option 82, the server copies the original Option 82 into the response. If the server is configured to ignore Option 82, the response will not contain Option 82. Examples # Configure the DHCP server to ignore Option 82. system-view [Sysname] undo dhcp server relay information enable display dhcp server conflict Use display dhcp server conflict to display information about IP address conflicts. Syntax display dhcp server conflict [ ip ip-address ] Views Any view Predefined user roles network-admin network-operator Parameters ip ip-address: Displays conflict information for the specified IP address. If you do not specify any IP address, this command displays information about all IP address conflicts. Usage guidelines The DHCP server creates IP address conflict information in the following conditions: 39