HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Command Referen - Page 247

tunnel discard ipv4-compatible-packet

Page 247 highlights

Default The DF bit is not set for tunneled packets. Views Tunnel interface view Predefined user roles network-admin Usage guidelines To avoid fragmentation and delay, set the DF bit for tunneled packets. Make sure the path MTU is larger than tunneled packets. Otherwise, do not set the DF bit to avoid discarding tunneled packets larger than the path MTU. This command is not supported on a GRE over IPv6 tunnel interface and an IPv6 tunnel interface. Examples # Set the DF bit for tunneled packets on the interface Tunnel 1. system-view [Sysname] interface tunnel 1 mode gre [Sysname-Tunnel1] tunnel dfbit enable tunnel discard ipv4-compatible-packet Use tunnel discard ipv4-compatible-packet to enable dropping of IPv6 packets using IPv4-compatible IPv6 addresses. Use undo tunnel discard ipv4-compatible-packet to restore the default. Syntax tunnel discard ipv4-compatible-packet undo tunnel discard ipv4-compatible-packet Default IPv6 packets using IPv4-compatible IPv6 addresses are not dropped. Views System view Predefined user roles network-admin Usage guidelines The tunnel discard ipv4-compatible-packet command enables the device to check the source and destination IPv6 addresses of the de-encapsulated IPv6 packets from the tunnel and discard packets that use a source or destination IPv4-compatible IPv6 address. Examples # Enable dropping of IPv6 packets using IPv4-compatible IPv6 addresses. system-view [Sysname] tunnel discard ipv4-compatible-packet 239

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257

239
Default
The DF bit is not set for tunneled packets.
Views
Tunnel interface view
Predefined user roles
network-admin
Usage guidelines
To avoid fragmentation and delay, set the DF bit for tunneled packets. Make sure the path MTU is larger
than tunneled packets. Otherwise, do not set the DF bit to avoid discarding tunneled packets larger than
the path MTU.
This command is not supported on a GRE over IPv6 tunnel interface and an IPv6 tunnel interface.
Examples
# Set the DF bit for tunneled packets on the interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1 mode gre
[Sysname-Tunnel1] tunnel dfbit enable
tunnel discard ipv4-compatible-packet
Use
tunnel discard ipv4-compatible-packet
to enable dropping of IPv6 packets using IPv4-compatible
IPv6 addresses.
Use
undo tunnel discard ipv4-compatible-packet
to restore the default.
Syntax
tunnel discard ipv4-compatible-packet
undo
tunnel discard ipv4-compatible-packet
Default
IPv6 packets using IPv4-compatible IPv6 addresses are not dropped.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The
tunnel discard ipv4-compatible-packet
command enables the device to check the source and
destination IPv6 addresses of the de-encapsulated IPv6 packets from the tunnel and discard packets that
use a source or destination IPv4-compatible IPv6 address.
Examples
# Enable dropping of IPv6 packets using IPv4-compatible IPv6 addresses.
<Sysname> system-view
[Sysname] tunnel discard ipv4-compatible-packet