HP C3916A HP LaserJet 5, 5M, and 5N Printer - User's Guide - Page 145
Continued on next
View all HP C3916A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Note Saving Power with the PowerSave Feature To reduce the amount of power it consumes, your printer has a PowerSave feature. PowerSave shuts down the fuser after the printer has been idle for a specified amount of time. The PowerSave feature is both adjustable and optional. You can set PowerSave to start after the printer has been idle 15 minutes, 30 minutes, 1 hour, 2 hours, or 3 hours, or you can turn PowerSave OFF. By default, PowerSave is ON and the amount of idle time is set to 30 minutes. When the printer is in PowerSave mode, the printer control panel displays the message POWERSAVE ON, which will replace the READY message on the printer control panel. Error messages override the PowerSave message. When an error condition is present, the printer displays the error message. At the appropriate time, the printer goes into PowerSave, but the error message continues to be displayed. The printer automatically comes out of PowerSave when you send a print job to the printer, press a printer control panel key, load or remove paper, or open the top cover. When the printer comes out of PowerSave, the printer control panel displays the message WARMING UP, as the fuser warms to operating temperature. The longer the printer was in PowerSave, the longer it takes the fuser to warm up. For example, after the printer has been in PowerSave overnight, it can take up to 45 seconds for the fuser to warm up. Continued on next page Maintaining and 8 Adjusting the EN Maintaining and Adjusting the Printer 8-7