HP C3916A HP LaserJet 5, 5M, and 5N Printer - User's Guide - Page 69
To Print Transparencies or Labels
View all HP C3916A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
To Print Transparencies or Labels: 1 Open Tray 1 by pulling down on the top center of the door. 2 Pull out the tray extension until it clicks into place. 3 Place up to 8 mm of labels or transparencies print-side-up in Tray 1. Caution Do not load transparencies up to the arrow on the paper guide tabs. The stack of transparencies shouldn't reach higher than 2 mm below the arrow. 4 In your software's print setup, specify paper size and Tray 1 for the paper source. 5 After printing, remove the printed sheet from the output bin and lay it on a flat surface. 4 Printing EN Printing 4-19
To Print Transparencies or Labels:
1
Open Tray 1 by pulling down on the
top center of the door.
2
Pull out the tray extension until it
clicks into place.
3
Place up to 8 mm of labels or
transparencies
print-side-up
in
Tray 1.
Caution
Do not load transparencies up to the arrow
on the paper guide tabs.
The stack of
transparencies shouldn’t reach higher than
2 mm below the arrow.
4
In your software’s print setup, specify
paper size and
Tray 1
for the paper
source.
5
After printing, remove the printed
sheet from the output bin and lay it on
a flat surface.
4
Printing
EN
Printing
4-19