HP C3916A HP LaserJet 5, 5M, and 5N Printer - User's Guide - Page 187
Checking Procedure, Validation Error Messages
View all HP C3916A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
D Printer Memory Checking Procedure To check memory for the 62.x ERROR message, follow the procedure below: 1 Switch the printer off, then back on (data will be lost). 2 If the error message appears again, switch your printer off and verify that the SIMM board is installed correctly, then switch your printer on. 3 If the error message appears again, switch printer off, remove the SIMM board(s) or cartridge, then switch printer back on. 4 If the error message appears again, the problem is in printer memory. If the error message does not appear, the problem is in SIMM memory. Call your HP service representative. Validation Error Messages Validation error messages appear when a SIMM fails to be initialized when the printer is turned on. This error is in the format 53.XY.ZZ ERROR. X (Hardware Type) Y (Hardware Device) ZZ (Error Number) 0: ROM 1: RAM 2: Flash 0: Internal Memory 1: SIMM Slot 1 2: SIMM Slot 2 3: SIMM Slot 3 4: SIMM Slot 4 0: Unsupported memory 1: Unrecognized memory 2: Unsupported memory size 3: Failed RAM test 4: Exceeded maximum RAM size 5: Exceeded maximum ROM size 6: Invalid SIMM speed 7: SIMM reporting information incorrectly 8: SIMM RAM parity error 10: SIMM address conflict 11: ROM out of bounds 12: Could not make temporary mapping Although these errors can be ignored, the SIMM that caused the error will not be configured. You can still print if the SIMM has more than one bank of memory. EN Printer Memory D-11