HP C3916A HP LaserJet 5, 5M, and 5N Printer - User's Guide - Page 44

Table 3-8 Configuration Menu Items (continued) Item CLR WARN Options ON* JOB AUTO CONT OFF* ON TONER DENSITY TONER LOW 1 2 3* 4 5 CONT* STOP *Indicates factory default. Explanation CLR WARN stands for "clearable warnings." This setting determines how long a clearable warning will be displayed on the printer control panel. When set to ON, the warning is displayed until the [Go] key is pushed. If set to JOB, the warning will be displayed until the end of the print job in which it was generated. The auto continue function determines how the printer reacts to data and printer errors. When auto continue is set to OFF, the printer displays an error message and goes off line until you press [Go]. When auto continue is set to ON, the printer displays a message and goes off line for about 10 seconds, then comes back on line. If your printer is part of a network or remote spooling system, set auto continue to ON. Determines the relative darkness of print on the paper. To make print darker, choose a higher number; to make it lighter, choose a lower number. See "Fine-Tuning Print Quality" in Chapter 6. The TONER LOW message will first appear when the printer is almost out of toner (about 100 to 300 sheets can still be printed). If TONER LOW is set to CONT, the printer will remain on line and continue to print while the message is displayed. If TONER LOW is set to STOP, the printer will go off line and wait for further action. See "Clearing the TONER LOW Message" in Chapter 8. 3-12 Using the Printer Control Panel EN