HP C3916A HP LaserJet 5, 5M, and 5N Printer - User's Guide - Page 61
To reserve and lock out Trays
View all HP C3916A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
To reserve and lock out Trays: This procedure does the following: • Changes the configuration of Tray 1 from the primary printing source (TRAY 1=FIRST) to a reserved printing source (TRAY 1=CASSETTE), and specifies a media size. • Selects a size for Tray 1 from the control panel. Locking Tray 1 1 Press [Menu] until CONFIG MENU appears. 2 Press [Item] until TRAY 1=setting appears. 3 Press [- Value +] until TRAY 1=CASSETTE appears, then press [Select]. 4 Press [Item] until LOCK TRAY=NONE appears. 5 Press [- Value +] until LOCK TRAY=1 appears, then press [Select] to save your selection. 6 Press [Item] until SIZE 1=setting appears. 7 Press [- Value +] until the desired size of paper you have selected appears, then press [Select]. 8 Press [Go] to place the printer back on line. 9 Place a stack of paper into Tray 1. Tray 1 is now locked out from automatic selection. The printer will not draw from Tray 1 unless it is selected through a software application. Locking Tray 2 and Optional Tray 3 • To reserve and lock out Tray 2 when no Tray 3 is present, first change the configuration of Tray 1 to TRAY 1=CASSETTE (follow steps 1-3). • Tray 2 and the optional Tray 3 are locked out the same way as Tray 1 (follow steps 4 through 8). 4 Printing EN Printing 4-11