HP C3916A HP LaserJet 5, 5M, and 5N Printer - User's Guide - Page 183
Installing SIMMs
View all HP C3916A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
D Printer Memory Installing SIMMs Caution SIMM boards can be damaged by small amounts of static electricity. Wear an antistatic wrist strap (or frequently touch the surface of the antistatic package or bare metal on the printer) when handling the board, and before installing or removing it. 1 Before you begin these steps, turn the printer off and unplug the power cord. 2 Rotate the printer so that you have easy access to the right and back sides of the printer. 3 Loosen the captive screw in the upper left corner of the back panel with a Phillips #2 screwdriver. The screw does not need to be completely removed from the printer. 4 Slide the right side panel towards the back of the printer (approximately an inch (25 mm)). 5 The panel should now easily open, exposing the SIMM door. Continued on next page EN Printer Memory D-7