Yamaha M7CL M7cl V3 Owner's Manual - Page 100

Operations in the Centralogic section Operations in the Centralogic section This section explains how you can use the Centralogic section and the OVERVIEW screen to simultaneously control the parameters of up to eight channels. 1 Use the navigation keys of the NAVIGATION KEYS section to select the channels or DCA groups that you want to control. When you press a navigation key, the LED of that key will light. The touch screen will show the OVERVIEW screen, and the parameters of the up to eight channels you selected will appear. HINT • When the SELECTED CHANNEL VIEW screen is displayed, you can switch to the OVERVIEW screen by pressing any of the multifunction encoders 1-8. This is convenient when you want to quickly switch to the OVERVIEW screen while leaving the same channels or DCA groups selected for control. Subsequent operations will differ depending on the parameters you want to adjust. ● Specifying the channel name and icon In the OVERVIEW screen you can use the channel number and channel name fields to specify the name and icon for each channel. This field includes the following items. 1 23 2 Use the faders and [ON] keys of the Centralogic section to adjust the level of the (up to) eight selected channels and switch them on/off. HINT • The bottom line of the OVERVIEW screen shows the channels or DCA groups that can be controlled by the faders, [ON] key, and [CUE] key of the Centralogic section. • The top line of the OVERVIEW screen shows the channels that can be controlled by multifunction encoders 1-8 of the Centralogic section. 3 Use the fields in the OVERVIEW screen and the multifunction encoders and [CUE] keys to adjust the parameters for the (up to) eight channels. 1 Channel number The number of that channel or DCA group. B Channel name C Icon These show the name and icon selected for that channel or DCA group. If you want to change the name or icon, press the field to access the PATCH/NAME popup window. (For details on the popup window → p. 59). ● Making HA settings (input channels only) For input channels to which a rear panel input jack or an external head amp device (e.g., Yamaha AD8HR, SB168ES) is patched, you can use the HA/PHASE field of the OVERVIEW screen to control the head amp. The HA/ PHASE field includes the following items. 12 100 M7CL Owner's Manual 3 1 GAIN knob This indicates the gain of the head amp assigned to the channel. To adjust the value, press the knob to select it, and operate multifunction encoders 1-8. B +48V This indicates the phantom power on (red) or off (black) status for the head amp assigned to the channel. C ø (Phase) This indicates either normal phase (black) or reverse phase (orange) for the head amp assigned to the channel. NOTE • The PAD will be internally switched on or off when the HA gain is adjusted between -14 dB and -13 dB. Keep in mind that noise may be generated if there is a difference between the Hot and Cold output impedance of the external device connected to the INPUT connector when using phantom power.