Yamaha M7CL M7cl V3 Owner's Manual - Page 201
PROGRAM CHANGE MODE field, CLEAR ALL button
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Using program changes to recall scenes and library items 4 Press the MIDI SETUP tab to access the MIDI SETUP page, and select the port and MIDI channel on which program changes will be transmitted and received, as described in "Basic MIDI settings" (→ p. 198). 5 Press the PROGRAM CHANGE tab to access the PROGRAM CHANGE page. In the PROGRAM CHANGE page you can specify how program changes will be transmitted and received, and choose the event (scene recall or effect library recall) that will be assigned to each program number. This page includes the following items. 1 2 3 4 6 5 1 PROGRAM CHANGE field Here you can switch program change transmission/ reception on/off, and specify whether program changes will be echoed out. This setting is linked with the PROGRAM CHANGE field of the MIDI SETUP page. B PROGRAM CHANGE MODE field Here you can select the program change transmit/ receive mode. This setting is linked with the PROGRAM CHANGE MODE field of the MIDI SETUP page. C List This list shows the event (scene recall / effect library recall) assigned to each program number. The list shows the following items. • CH/BANK........Indicates the MIDI channel 1-16 on which program changes are transmitted/received. In Single mode if the BANK button is on, this will be labeled BANK, and the numerical value in this column will correspond to the bank number. • NO Indicates the program number 1- 128. • PROGRAM CHANGE EVENT ...........Indicates the type/number/title of the event assigned to the program number for each MIDI channel (bank number). You can press an individual event to access the MIDI PROGRAM CHANGE popup window, where you can change the assignment for each program number. D CLEAR ALL button Pressing this button will delete all event assignments in the list. E INITIALIZE ALL button Pressing this button will restore all event assignments in the list to their default state. F Scroll knob This knob scrolls the contents of the list. You can use multifunction encoder to control this. 6 Use the buttons of the PROGRAM CHANGE MODE field to select the program change transmission/reception mode. You can select one of the following two program change transmission/reception modes. ● Multi mode (when the MULTI button is on) Program changes of all MIDI channels will be transmitted and received. (The transmit/receive channel specified in the MIDI SETUP page will be ignored.) When a program change is received, the event assigned to the corresponding MIDI channel and program number in the list will be executed. When you execute the specified event on the M7CL, the program change of the corresponding MIDI channel and program number in the list will be transmitted. ● Single mode (when the SINGLE button is on) Only program changes of the transmit (Tx) and receive (Rx) channels specified in the MIDI SETUP page will be transmitted and received. When a program change on the Rx channel is received, the event assigned to that program number of the corresponding channel in the list will be executed. When you execute the specified event on the M7CL, the program change of the corresponding program number will be transmitted on the Tx channel shown in the list. (If an event is assigned to more than one program number on the same channel, the lowestnumbered program number will be transmitted.) If you turn on the OMNI button / BANK button in Single mode, operation will change as follows. • When the OMNI button is on ........... Program changes of all MIDI channels will be received. However, regardless of the MIDI channel that is received, the event assigned to the corresponding program number of the Rx channel will be executed. Turning on the OMNI button will not change the operation for program change transmission. • When the BANK button is on ........... The CH indication in the list will change to BANK (bank number), and bank select (control change #0, #32) + program change messages can be transmitted and received. This is convenient when you want to control more than 128 events on a single MIDI channel. MIDI 17 M7CL Owner's Manual 201
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/201.png)