Yamaha M7CL M7cl V3 Owner's Manual - Page 40
Copying/pasting settings, Comparing two settings, Press the COPY button.
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using the tool buttons Copying/pasting settings Here's how the EQ/dynamics settings of the currently selected channel or the GEQ/effect settings of a rack can be copied to a buffer memory and pasted to another channel or rack. Copy/paste operations are restricted to the following combinations. • Between input channel EQ settings • Between output channel EQ settings • Between dynamics processors for which the paste- destionation has the same type (GATE, DUCKING, COMPRESSOR, EXPANDER, COMPANDER-H, COMPANDER-S, or DE-ESSER) as the copysource • Between effects/GEQ mounted in a rack HINT • Only 31BandGEQ settings that use less than fifteen bands can be copied to a Flex15GEQ. 1 Open a popup window that provides the tool buttons. 2 Select the channel (EQ/dynamics) or rack (GEQ/effect) whose settings you want to copy. 3 Press the COPY button. The current settings will be saved in the buffer memory. NOTE • Be aware that if you copy other settings before you paste, the buffer memory will be overwritten. • You can select only one channel or rack as the copy-source. If multiple channels are selected in the 8 ch/ALL popup window, you won't be able to press the COPY button. 4 Select the paste-destination channel or rack. HINT • If you're pasting EQ/dynamics settings, you can use the 8 ch/ ALL popup window to select multiple channels as the pastedestination. In this case, the same content will be pasted to all selected channels. 5 Press the PASTE button. The settings of the channel (EQ/dynamics) or the rack (GEQ/effect) you selected in step 2 will be pasted. NOTE • Be aware that when you paste, the settings will overwrite the paste-destination. • If nothing has been stored in the buffer memory, the PASTE button cannot be pressed. • Of the two types of GEQ, using the tool buttons in a rack where a Flex15GEQ is selected will cause the settings to be copied/pasted individually. • Effect settings with an effect type of "HQ.Pitch" or "Freeze" cannot be pasted to rack 6 or 8. Comparing two settings You can use the COMPARE button to exchange the settings held in the buffer memory with the settings of the currently selected channel (EQ/dynamics) or rack (GEQ/ effect). This is convenient when you want to temporarily keep the settings at a certain point, and compare them later with the subsequently edited settings. 1 Open a popup window that provides the tool buttons. 2 Select a channel (EQ/dynamics) or rack (GEQ/effect). 3 Press the COPY button to place the current settings in the buffer memory. This will be the first set of settings. NOTE • Be aware that if you copy other settings before you compare, the buffer memory will be overwritten. 4 Edit the settings of the currently selected channel (EQ/dynamics) or rack (GEQ/ effect). This will be the second set of settings. HINT • After you've stored the first set of settings in the buffer memory, you can initialize the channel or rack and edit the second set of settings from an initialized state if desired. 40 M7CL Owner's Manual
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/40.png)