Yamaha M7CL M7cl V3 Owner's Manual - Page 126
Using mute groups, Assigning channels to mute groups, groups
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Using mute groups Using mute groups This section explains how to assign channels to mute groups and use the user-defined keys to control them. Assigning channels to mute groups To assign channel to mute groups, you can either select a specific mute group and then assign channels to that mute group, or you can select a specific channel and then specify the mute groups to which it will belong. NOTE • To operate a mute group, you'll need to assign the desired channels to a mute group, and then assign MUTE MASTER to a userdefined key. HINT • Mute groups can be used for both input channels and output channels. Both types of channel can exist in the same group. • Mute group settings are saved as part of the scene. ● Selecting the channels that will belong to a specific mute group 1 In the function access area, press the CH JOB button. The function access area will change as follows. MUTE GROUP button 2 Press the MUTE GROUP button to access the DCA/MUTE GROUP ASSIGN MODE popup window. In this popup window you can select the channels that will be assigned to each mute group. The popup window includes the following items. 1 5 2 3 4 1 Channel display field Channels assigned to the mute group selected by the MUTE GROUP 1-8 buttons are highlighted in red. If the MUTE SAFE button is selected, channels that are temporarily excluded from all mute groups are highlighted in green. B MUTE GROUP ASSIGN button Use this button to switch the mode in which you want to assign mute groups. C MUTE GROUP 1-8 buttons These buttons select mute groups 1-8. D MUTE SAFE button Use this button when you want to temporarily exclude a specific channel from all mute groups. The channel display field shows the channels that are temporarily excluded from the mute groups. For more about mute safe, refer to "Using the Mute Safe function" (→ p. 129). E CLEAR ALL button You can press this button to clear the channels that are assigned to the mute groups. 3 Use the MUTE GROUP 1-8 buttons to select the mute group to which you want to assign channels. 4 Press the [SEL] key of the input channels / output channels (you may select more than one) that you want to assign. The [SEL] keys of the assigned channels will light, and the corresponding channels will be highlighted in red in the channel display field of the window. To cancel an assignment, press a lit [SEL] key once again to make it go dark. 5 Assign channels to other mute groups in the same way. HINT • You are free to assign a single channel to more than one mute group. 6 When you finish making assignments, press the CLOSE button to close the popup window, and press the "×" symbol in the function access area (CH JOB display). You will return to the previous screen. The DCA/ MUTE GROUP field of the OVERVIEW screen indicates the mute group(s) to which each channel is assigned. Numbers that are lit red in the lower line of this field indicate the mute groups to which that channel belongs. 126 M7CL Owner's Manual